In the console tree of ISA Server Management, click
Virtual Private Networks (VPN).
In the details pane, click the Remote Sites tab.
On the Tasks tab, click Add Remote Site
Network.
In the wizard, follow the on-screen instructions.
Notes
To open ISA Server Management, click Start, point to
All Programs, point to Microsoft ISA Server, and then
click ISA Server Management.
For ISA Server 2006 Enterprise Edition, expand
Microsoft Internet Security and Acceleration
Server 2006, expand Arrays, expand
Array_Name, and then click Virtual Private
Networks (VPN).
For ISA Server 2006 Standard Edition, expand Microsoft
Internet Security and Acceleration Server 2006, expand
Server_Name, and then click Virtual Private
Networks (VPN).
Important
When you create a remote site network that uses the Internet
Protocol security (IPsec) tunneling protocol, the Microsoft
Firewall service modifies the IPsec filters on the computer, when
restarting the Firewall service. This process can take up to
several minutes, depending on the number of subnets included in the
address ranges for the network. To minimize the effect, we
recommend that you define IP address ranges that are aligned in
subnet boundaries.
If you stop or restart the IPsec PolicyAgent service, all
dynamic IPsec configuration information is lost, including ISA
Server VPN site-to-site IPsec configuration settings, and VPN
clients are disconnected. To restore settings, start the
PolicyAgent service or restart the Firewall service.
A remote site network cannot share the same IP addresses as one
of your other networks.
Get
latest ISA Server content at ISA
Server Guidance.
Send
feedback about this page.