In the console tree of ISA Server Management, click
Virtual Private Networks (VPN).
In the details pane, click the Remote Sites tab, and
then select the applicable remote site network.
On the Tasks tab, click Configure Remote
Site.
On the Addresses tab, click Add Range.
In Start address, type the first address in the range.
In End address, type the last address in the range.
For ISA Server 2006 Enterprise Edition, to add an
enterprise network, click Add Network, and then select the
applicable enterprise networks.
Notes
To open ISA Server Management, click Start, point to
All Programs, point to Microsoft ISA Server, and then
click ISA Server Management.
For ISA Server 2006 Enterprise Edition, expand
Microsoft Internet Security and Acceleration
Server 2006, expand Arrays, expand
Array_Name, and then click Virtual Private
Networks (VPN).
For ISA Server 2006 Standard Edition, expand Microsoft
Internet Security and Acceleration Server 2006, expand
Server_Name, and then click Virtual Private
Networks (VPN).
Important
When you create a remote site network that uses the Internet
Protocol security (IPsec) tunneling protocol, the Microsoft
Firewall service modifies the IPsec filters on the computer, when
restarting the Firewall service. This process can take up to
several minutes, depending on the number of subnets included in the
address ranges for the network. To minimize the effect, we
recommend that you define IP address ranges that are aligned in
subnet boundaries.
Get
latest ISA Server content at ISA
Server Guidance.
Send
feedback about this page.