If the network includes Novell NetWare Services and you want to enable remote access to NetWare Servers, you must do the following:

Configuring Novell logon settings

To configure Novell logon settings

  1. Access the File Access window, as described in Accessing the File Access Window.

  2. In the left pane of the File Access window, under General, click Novell.

    In the right pane, the Novell Logon settings are displayed.

  3. Select one of the following options:

    • Using Windows User Name—Use the same credentials you used when you logged onto the File Access window.

    • Using the Following User Name and Password—Enter credentials with which to log on.

    Tip:
    Make sure the credentials you assign here enable you to view all the NetWare Servers to which you wish to configure access, such as the credentials of a Novell administrator.
  4. Click Save, and then click Logon.

    The system logs you on to the Novell NetWare Services. When you configure Novell NetWare Servers, the servers and shares that are enabled to the user you define here, are displayed in the File Access window.

  5. Proceed with configuring remote users’ access to domains, servers, and shares, as described in the procedure that follows.

    Note:
    In order to log on to a different tree, enter the applicable credentials, and click Logon.Only one set of credentials can be saved in the Novell Logon window.Any time after the initial configuration, in order to modify the configuration of remote users’ access to the NetWare Servers, you must log on to the Novell NetWare Services by using the Novell Logon window.

Enabling access to NetWare Servers

To enable access to NetWare Servers

  1. In the Forefront UAG Management console, on the Admin menu, click Authentication and Authorization Servers.

  2. On the Authentication and Authorization Servers dialog box, click Add.

  3. On the Add Server dialog box, in the Type list, select Novell Directory, and then define the server.

  4. When you have finished defining the server, click OK to close the Add Server dialog box.

    In the Authentication and Authorization Servers dialog box, the Novell Directory server you defined is added to the list of authentication servers.

  5. Close the Authentication and Authorization Servers dialog box.

  6. In the main window of the Forefront UAG Management console, next to Configure Trunk Settings, click Configure to open the Advanced Trunk Configuration window.

  7. In the Authentication tab, in the top left area, click Add to the right of the Select authentication servers list.

  8. In the Authentication and Authorization Servers dialog box, select the server you defined in step 3, and then click Select.

    The Authentication and Authorization Servers dialog box closes. In the Authentication tab, the Novell Directory server you defined is added to the list of servers in the Authentication tab.

    Remote users' access to Novell NetWare Servers is enabled.