Resource publishing

Here it is possible to specify the internal resources to which UserGate Proxy Server will open access from the Internet.

To open access to a local network resource press the Add button on the Control Panel. In the dialogue window that appears, specify the following:

• Name - network resource name.
• Source interface - IP address of network interface for the Internet.
• Destination interface - IP address of the internal network interface card.
• Destination IP - IP address of the local network resource.
• Port - port number.
• Protocol - protocol type (TCP/UDP).
• User - user, to whom the traffic will be assigned.

If the Destination port is identical to the Source port, check the Same port checkbox.

Setting '0' for the port number, you can forward all the TCP/UDP traffic (for all ports with TCP or UDP protocols) to a specified internal server.

Publishing rules are applied in the order they are listed. If there's more than one rule for the same port on the external interface, the rule higher in the list will apply. To change the order of the rules in the list, use the Up and Down buttons.

Publishing setup rules automatically generate firewall rules, which allow the traffic through the specified ports.